Zum Inhalt Zum Hauptmenü

Plant System E15, 20 pcs.

Iron fertilizer for large, demanding plant aquaria
  • Nutrient iron for large and heavily planted aquaria
  • With 2-valent, directly plant-available nutrient iron
  • For lush green leaves and intense colors
  • Immediate and long-term effect
  • High reach due to highly concentrated ingredients
  • Optimized effect in the Plant System in combination with V30 and S7

Plant System E15, 40 pcs.

Iron fertilizer for large, demanding plant aquaria
  • Nutrient iron for large and heavily planted aquaria
  • With 2-valent, directly plant-available nutrient iron
  • For lush green leaves and intense colors
  • Immediate and long-term effect
  • High reach due to highly concentrated ingredients
  • Optimized effect in the Plant System in combination with V30 and S7

Plant System E15, 100 pcs.

Iron fertilizer for large, demanding plant aquaria
  • Nutrient iron for large and heavily planted aquaria
  • With 2-valent, directly plant-available nutrient iron
  • For lush green leaves and intense colors
  • Immediate and long-term effect
  • High reach due to highly concentrated ingredients
  • Optimized effect in the Plant System in combination with V30 and S7

Variations

Size
100 Pieces 20 Pieces 40 Pieces

The iron fertilizer from the Dennerle Plant System Set

As the size of the aquarium increases, so does the quantity and size of the plants. For this reason we have developed our plant system, a system with highly concentrated components. The components of Plant System V30 (complete fertilizer), Plant System S7 (vital substances) and Plant System E15 (iron fertilizer) are therefore developed to meet the needs of large aquaria. All macro- and micronutrients as well as trace elements are covered. Plant System E15 iron fertilizer provides all aquarium plants with divalent nutrient iron II that they can use immediately, thereby ensuring a beautiful, fresh green color. Iron is of central importance for all aquarium plants. It is needed for the formation of the vital leaf green. Without leaf green, the plant cannot carry out photosynthesis. Iron deficiency shows up immediately: the young leaves appear pale and yellowish (iron chlorosis). Important to know: Plants can only absorb so-called bivalent iron. Unfortunately, this is not stable in the aquarium, but is quickly oxidized and thus converted to ineffective trivalent, "brown" iron. Tap water contains practically no iron. Aquarium plants are therefore dependent on regular iron fertilization. Special protective shells – so-called chelates – provide the E15 iron with effective protection and ensure its long-term availability to plants in the aquarium (depot effect). E15 is phosphate- and nitrate-free and thus does not promote algae growth. Special Note: Commercial iron tests often fail to detect chelated iron. These tests then indicate inadequate results, although there is actually enough iron in the aquarium water.  

Application

Simply add tablets to the aquarium water, ideally after replacing part of the water. They will dissolve slowly over a few days.  

Dosage

1 tablet per 100 L (26.4 US gal) adds 0.27 mg/l (ppm) iron to the aquarium water. Regular use results in an iron content in the optimum range of 0.05 – 0.2 mg/l (ppm).
content image

The Dennerle Level System

With the level system you can find the right fertilizer quickly and easily.

Level 1 = For planted aquariums of type 1 with simple and few plants.
Level 2 = For heavily planted aquariums:

  • of type 2 with many and demanding plants
  • Type 3 from a size of 100 L with demanding plants

Add-Ons = optional care products to improve growth and health suitable for all aquarium types

 

Type 3 aquaria

The fertilizer set was specially developed for heavily planted community aquariums. This type of aquarium is characterized by a planting of approx. 70 – 80 % of the bottom surface, approx. half of which are fast-growing species and good growing conditions (good lighting, CO2 supply).

Specification

Product information

Product name Plant System E15, 20 pcs.
Article number 4824

Declaration

NP fertilizer 2 + 14 containing iron and manganese, with complexing agent EDTA
2.1 % N total nitrogen
14 % K2O water-soluble potassium oxide
2.98 % Fe total iron = water-soluble iron*
0.74 % Mn total manganese = water-soluble manganese*
*up to 50% EDTA chelation at pH 3 – 7
Net weight: See product packaging
Marketed by: Dennerle GmbH, D-66981 Münchweiler, Germany

Secondary constituents: 2.69 % S water-soluble sulphur, 4.02 % Na water-soluble sodium, 55.9 % organic matter
Preserving agents: Filling agent: sodium sulphate; pressing agents: cellulose, silicon dioxide, PVP, calcium stearat
Application agent: EDTA as complexing agent
Storage instructions: Store at room temperature. Protect from heat and frost. Keep out of reach of children and pets.
Specified mode of use: For fertilizing ornamental plants in aquaria only. See above information on use for detailed description of usage and dosing. Note: Official advice is to take precedence over our information.

Guides

Types of aquaria

Beginner Guide – Part 1

Beginner Guide – Part 2

Beginner Guide – Part 3

Expansion stages for a compressed gas system

What do I need carbon dioxide for?

Overview of aquarium energy consumption

The iron fertilizer from the Dennerle Plant System Set

As the size of the aquarium increases, so does the quantity and size of the plants. For this reason we have developed our plant system, a system with highly concentrated components. The components of Plant System V30 (complete fertilizer), Plant System S7 (vital substances) and Plant System E15 (iron fertilizer) are therefore developed to meet the needs of large aquaria. All macro- and micronutrients as well as trace elements are covered. Plant System E15 iron fertilizer provides all aquarium plants with divalent nutrient iron II that they can use immediately, thereby ensuring a beautiful, fresh green color. Iron is of central importance for all aquarium plants. It is needed for the formation of the vital leaf green. Without leaf green, the plant cannot carry out photosynthesis. Iron deficiency shows up immediately: the young leaves appear pale and yellowish (iron chlorosis). Important to know: Plants can only absorb so-called bivalent iron. Unfortunately, this is not stable in the aquarium, but is quickly oxidized and thus converted to ineffective trivalent, "brown" iron. Tap water contains practically no iron. Aquarium plants are therefore dependent on regular iron fertilization. Special protective shells – so-called chelates – provide the E15 iron with effective protection and ensure its long-term availability to plants in the aquarium (depot effect). E15 is phosphate- and nitrate-free and thus does not promote algae growth. Special Note: Commercial iron tests often fail to detect chelated iron. These tests then indicate inadequate results, although there is actually enough iron in the aquarium water.  

Application

Simply add tablets to the aquarium water, ideally after replacing part of the water. They will dissolve slowly over a few days.  

Dosage

1 tablet per 100 L (26.4 US gal) adds 0.27 mg/l (ppm) iron to the aquarium water. Regular use results in an iron content in the optimum range of 0.05 – 0.2 mg/l (ppm).
content image

The Dennerle Level System

With the level system you can find the right fertilizer quickly and easily.

Level 1 = For planted aquariums of type 1 with simple and few plants.
Level 2 = For heavily planted aquariums:

  • of type 2 with many and demanding plants
  • Type 3 from a size of 100 L with demanding plants

Add-Ons = optional care products to improve growth and health suitable for all aquarium types

 

Type 3 aquaria

The fertilizer set was specially developed for heavily planted community aquariums. This type of aquarium is characterized by a planting of approx. 70 – 80 % of the bottom surface, approx. half of which are fast-growing species and good growing conditions (good lighting, CO2 supply).

Specification

Product information

Product name Plant System E15, 40 pcs.
Article number 4825

Declaration

NP fertilizer 2 + 14 containing iron and manganese, with complexing agent EDTA
2.1 % N total nitrogen
14 % K2O water-soluble potassium oxide
2.98 % Fe total iron = water-soluble iron*
0.74 % Mn total manganese = water-soluble manganese*
*up to 50% EDTA chelation at pH 3 – 7
Net weight: See product packaging
Marketed by: Dennerle GmbH, D-66981 Münchweiler, Germany

Secondary constituents: 2.69 % S water-soluble sulphur, 4.02 % Na water-soluble sodium, 55.9 % organic matter
Preserving agents: Filling agent: sodium sulphate; pressing agents: cellulose, silicon dioxide, PVP, calcium stearat
Application agent: EDTA as complexing agent
Storage instructions: Store at room temperature. Protect from heat and frost. Keep out of reach of children and pets.
Specified mode of use: For fertilizing ornamental plants in aquaria only. See above information on use for detailed description of usage and dosing. Note: Official advice is to take precedence over our information.

Guides

Types of aquaria

Beginner Guide – Part 1

Beginner Guide – Part 2

Beginner Guide – Part 3

Expansion stages for a compressed gas system

What do I need carbon dioxide for?

Overview of aquarium energy consumption

The iron fertilizer from the Dennerle Plant System Set

As the size of the aquarium increases, so does the quantity and size of the plants. For this reason we have developed our plant system, a system with highly concentrated components. The components of Plant System V30 (complete fertilizer), Plant System S7 (vital substances) and Plant System E15 (iron fertilizer) are therefore developed to meet the needs of large aquaria. All macro- and micronutrients as well as trace elements are covered. Plant System E15 iron fertilizer provides all aquarium plants with divalent nutrient iron II that they can use immediately, thereby ensuring a beautiful, fresh green color. Iron is of central importance for all aquarium plants. It is needed for the formation of the vital leaf green. Without leaf green, the plant cannot carry out photosynthesis. Iron deficiency shows up immediately: the young leaves appear pale and yellowish (iron chlorosis). Important to know: Plants can only absorb so-called bivalent iron. Unfortunately, this is not stable in the aquarium, but is quickly oxidized and thus converted to ineffective trivalent, "brown" iron. Tap water contains practically no iron. Aquarium plants are therefore dependent on regular iron fertilization. Special protective shells – so-called chelates – provide the E15 iron with effective protection and ensure its long-term availability to plants in the aquarium (depot effect). E15 is phosphate- and nitrate-free and thus does not promote algae growth. Special Note: Commercial iron tests often fail to detect chelated iron. These tests then indicate inadequate results, although there is actually enough iron in the aquarium water.  

Application

Simply add tablets to the aquarium water, ideally after replacing part of the water. They will dissolve slowly over a few days.  

Dosage

1 tablet per 100 L (26.4 US gal) adds 0.27 mg/l (ppm) iron to the aquarium water. Regular use results in an iron content in the optimum range of 0.05 – 0.2 mg/l (ppm).
content image

The Dennerle Level System

With the level system you can find the right fertilizer quickly and easily.

Level 1 = For planted aquariums of type 1 with simple and few plants.
Level 2 = For heavily planted aquariums:

  • of type 2 with many and demanding plants
  • Type 3 from a size of 100 L with demanding plants

Add-Ons = optional care products to improve growth and health suitable for all aquarium types

 

Type 3 aquaria

The fertilizer set was specially developed for heavily planted community aquariums. This type of aquarium is characterized by a planting of approx. 70 – 80 % of the bottom surface, approx. half of which are fast-growing species and good growing conditions (good lighting, CO2 supply).

Specification

Product information

Product name Plant System E15, 100 pcs.
Article number 4826

Declaration

NP fertilizer 2 + 14 containing iron and manganese, with complexing agent EDTA
2.1 % N total nitrogen
14 % K2O water-soluble potassium oxide
2.98 % Fe total iron = water-soluble iron*
0.74 % Mn total manganese = water-soluble manganese*
*up to 50% EDTA chelation at pH 3 – 7
Net weight: See product packaging
Marketed by: Dennerle GmbH, D-66981 Münchweiler, Germany

Secondary constituents: 2.69 % S water-soluble sulphur, 4.02 % Na water-soluble sodium, 55.9 % organic matter
Preserving agents: Filling agent: sodium sulphate; pressing agents: cellulose, silicon dioxide, PVP, calcium stearat
Application agent: EDTA as complexing agent
Storage instructions: Store at room temperature. Protect from heat and frost. Keep out of reach of children and pets.
Specified mode of use: For fertilizing ornamental plants in aquaria only. See above information on use for detailed description of usage and dosing. Note: Official advice is to take precedence over our information.

Guides

Types of aquaria

Beginner Guide – Part 1

Beginner Guide – Part 2

Beginner Guide – Part 3

Expansion stages for a compressed gas system

What do I need carbon dioxide for?

Overview of aquarium energy consumption